Brake Disc

Brake Disc













Removal

1. Remove the wheel and tire. For additional information, refer to Wheels and Tires.

2. NOTICE: Do not allow the brake caliper and anchor plate assembly to hang from the brake hose or damage to the hose can occur.

Remove the 2 brake caliper anchor plate bolts and position the brake caliper and anchor plate assembly aside.

- Support the brake caliper and anchor plate assembly using mechanic's wire.

3. Remove the brake disc.

Installation

1. Using specified brake parts cleaner, clean and dry the brake disc-to-hub mounting surface, then apply a thin coat of the specified anti-seize lubricant where indicated.





2. Install the brake disc onto the wheel hub.

3. Position the brake caliper and anchor plate assembly and install the 2 brake caliper anchor plate bolts.
- Tighten to 90 Nm (66 lb-ft).

4. Install the wheel and tire. For additional information, refer to Wheels and Tires.
- Apply brakes several times to verify correct brake operation.