Console: Service and Repair

Console - Floor









Removal and Installation

Vehicles with a manual transmission

1. Depress the parking brake pedal.

2. Shift the transmission into NEUTRAL.

All vehicles

3. Position the seats forward and remove the 2 floor console rear bolts.
- To install, tighten to 7 Nm (62 lb-in).

4. Position the seats rearward.

Vehicles with an automatic transmission

5. Remove the selector lever trim ring.

Vehicles with a manual transmission

6. Disengage the gear shift boot trim ring.

All vehicles

7. Remove the floor console storage bin.

8. Remove the floor console finish panel.
- If equipped, disconnect the electrical connectors.

9. Remove the 8 floor console bolts and remove the floor console.

10. To install, reverse the removal procedure.
- Make sure to align the trim panel retaining clips to the retaining clip holes in the floor console.