Heater Core

Climate Control System

Component Tests

Heater Core

1. NOTE: If a heater core leak is suspected, the heater core must be tested by following the Plugged Heater Core component test before the heater core pressure test. Carry out a system inspection by checking the heater system thoroughly as follows:

Inspect for evidence of coolant leakage at the heater hose to heater core attachments. A coolant leak in the heater hose could follow the heater core tube to the heater core and appear as a leak in the heater core.

2. NOTE: Spring-type clamps are installed as original equipment. Installation and overtightening of non-specified clamps can cause leakage at the heater hose connection and damage the heater core.

Check the integrity of the heater hose clamps.