Upper

Transaxle Support Insulator - Upper

Removal and Installation

1. Remove the Air Cleaner (ACL) assembly. For additional information, refer to Fuel Delivery and Air Induction.

2. Install the Engine Support Bar, Support Leg Adapter, Engine Support Bar Adapter and Lifting Hook Adapter.

3. Remove the upper insulator bracket bolt, nut and the bracket.
- To install, tighten to 25 Nm (18 lb-ft).

4. Remove the upper insulator.

1. Remove the upper insulator nuts.
- To install, tighten to 90 Nm (66 lb-ft).

2. Remove the upper insulator through bolt.
- To install, tighten the bolt to 103 Nm (76 lb-ft).

5. To install, reverse the removal procedure.