Coolant Pump

Coolant Pump - 3.0L (4V)









Removal

1. Drain the cooling system. For additional information, refer to Cooling System Draining, Filling and Bleeding Service and Repair.

2. Remove the Air Cleaner (ACL) outlet pipe. For additional information, refer to Fuel Delivery and Air Induction.

3. Disconnect the lower radiator hose from the thermostat housing.

4. Remove the coolant pump belt. For additional information, refer to Drive Belts, Mounts, Brackets and Accessories.

5. Remove the 3 bolts and the coolant pump.
- Remove and discard the gasket.

Installation

1. Using a new gasket, install the coolant pump and the 3 bolts.
- Tighten to 10 Nm (89 lb-in).

2. Install the coolant pump belt. For additional information, refer to Drive Belts, Mounts, Brackets and Accessories.

3. Connect the lower radiator hose to the thermostat housing.

4. Install the ACL outlet pipe. For additional information, refer to Fuel Delivery and Air Induction.

5. Fill and bleed the cooling system. For additional information, refer to Cooling System Draining, Filling and Bleeding Service and Repair.