Halfshaft Seal

Halfshaft Seal - RH, Front Wheel Drive (FWD)

















Removal

1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.

2. Remove the intermediate shaft. For additional information, refer to Drive Axles, Bearings and Joints.

3. Using a suitable awl, poke a small hole in the halfshaft seal.





4. Using a suitable dent puller, remove the halfshaft seal.





Installation

1. Install a new halfshaft seal on the Differential Seal Installer and Handle.





2. Using the Differential Seal Installer and Handle, install the RH halfshaft seal.





3. Install the intermediate shaft. For additional information, refer to Drive Axles, Bearings and Joints.

4. Fill with clean transmission fluid to the correct level.