Transaxle Support Insulator - LH

Transaxle Support Insulator - LH





Transaxle Support Insulator - LH Exploded View









Removal and Installation

All vehicles

1. Remove the Air Cleaner (ACL) assembly and outlet pipe. For additional information, refer to Fuel Delivery and Air Induction.

Vehicles equipped with a 2.5L engine

2. Install the Engine Support Bar and Adapters and support the engine and transaxle.





Vehicles equipped with a 3.0L engine

3. Remove the 2 upper radiator hose retainers from the radiator support and position aside the upper radiator hose.





4. Disconnect the LH Heated Oxygen Sensor (HO2S) electrical connector, remove the wiring harness retainer from the LH valve cover and position aside the wiring harness.





5. Remove the 2 retainers from the valve cover studs, remove the retainer from the main control cover stud and position aside the alternator power cable.





6. Install the Engine Lifting Bracket and the Universal Mounting Brackets on both cylinder heads.





7. Install the Engine Support Bar, Support Leg and Adapters.





8. Install the Engine Lifting Chain and Adapter and support the engine and transaxle.





All vehicles

9. Remove the LH support insulator.

1. Remove the LH support insulator through bolt.
- To install, tighten to 103 Nm (76 lb-ft).

2. Remove the top LH support insulator bolts.
- To install, tighten to 48 Nm (35 lb-ft).

3. Remove the side LH support insulator bolts.
- To install, tighten to 48 Nm (35 lb-ft).

4. Remove the LH support insulator.





10. To install, reverse the removal procedure.