Seat Backrest - Third Row, 40 Percent

Seat Backrest - Third Row, 40 Percent

Disassembly and Assembly

NOTE: For parts identification and locations, refer to Seat - Exploded View, Third Row Seat - Exploded View, Third Row.

1. Remove the seat backrest cover. For additional information, refer to Seat Backrest Cover - Third Row Seat Backrest Cover - Third Row.

2. Remove the bolt and the safety belt buckle.
- For installation, align the anti-rotation tab.

- To install, tighten to 40 Nm (30 lb-ft).

3. Remove the nut, screw and support bracket.

4. Remove the 2 inboard latch-to-backrest frame bolts and the inboard latch.
- To install, tighten to 40 Nm (30 lb-ft).

5. Remove the outboard latch-to-cushion frame bolt and the outboard latch.
- To install, tighten to 30 Nm (22 lb-ft).

6. Remove the 6 screws and the backrest support panel.

7. To assemble, reverse the disassembly procedure.