Seat Backrest - Third Row, 60 Percent

Seat Backrest - Third Row, 60 Percent

Disassembly and Assembly

NOTE: For parts identification and locations, refer to Seat - Exploded View, Third Row Seat - Exploded View, Third Row.

1. Remove the seat backrest cover. For additional information, refer to Seat Backrest Cover - Third Row Seat Backrest Cover - Third Row.

2. Remove the safety belt anchor bolt.
- To install, tighten to 40 Nm (30 lb-ft).

3. Remove the backrest foam pad.

4. Remove the nut, screw and support bracket.

5. Remove the outboard latch-to-cushion frame bolt and outboard latch.
- To install, tighten to 35 Nm (26 lb-ft).

6. Remove the 2 inboard latch-to-backrest frame bolts and inboard latch.
- To install, tighten to 55 Nm (41 lb-ft).

7. Remove the 4 screws and safety belt retractor cover.

8. Remove the safety belt retractor bolt.
- To install, tighten to 40 Nm (30 lb-ft).

9. Pinch to release the safety belt guide and remove the safety belt retractor.
- Route through the backrest frame.





10. Remove the 15 screws and backrest support panel.

11. Remove the bolt and child safety seat tether anchor.
- To install, tighten to 15 Nm (133 lb-in).





12. To assemble, reverse the disassembly procedure.