Seat Cushion - Second Row, 20 Percent

Seat Cushion - Second Row, 20 Percent

Disassembly and Assembly

NOTE: For parts identification and locations, refer to Seat - Exploded View, Second Row Seat - Exploded View, Second Row.

1. Remove the seat backrest. For additional information, refer to Seat Backrest - Second Row, 20 Percent Seat Backrest - Second Row, 20 Percent.

2. Remove the 2 screws and LH side shield.

3. Remove the nut and safety belt buckle.
- To install, align the anti-rotation tab.
- To install, tighten to 55 Nm (41 lb-ft).

4. Release the cushion cover front J-clip.

5. Remove the 2 riser-to-cushion frame bolts and cushion frame.
- To install, tighten to 30 Nm (22 lb-ft).

6. Release the hook-and-loop strip and remaining cushion cover J-clips.

7. Remove the cushion frame from the foam pad and cushion cover.

8. NOTICE: Use care when separating the seat cushion cover from the hook-and-loop strip, or the hook-and-loop strip may be torn from the seat cushion foam.

Release the hook-and-loop strips and invert the cushion cover to the row of hog rings.

9. Remove all hog rings and cushion cover.

10. To assemble, reverse the disassembly procedure.