Seat Cushion - Third Row, 60 Percent

Seat Cushion - Third Row, 60 Percent

Disassembly and Assembly

NOTE: For parts identification and locations, refer to Seat - Exploded View, Third Row Seat - Exploded View, Third Row.

1. Remove the seat backrest. For additional information, refer to Seat Backrest - Third Row, 60 Percent Seat Backrest - Third Row, 60 Percent.

2. Remove the inboard and outboard slide bracket-to-cushion frame nuts and slide bracket from both sides of the seat cushion.
- To install, tighten to 15 Nm (133 lb-in).

3. Remove the 2 seat riser-to-cushion frame bolts and riser.
- To install, tighten to 30 Nm (22 lb-ft).

4. Release the cushion cover J-clips and remove the cushion frame.

5. NOTICE: Use care when separating the cushion cover from the hook-and-loop strip, or the hook-and-loop strip may be torn from the cushion foam pad.

Separate the hook-and-loop strips and invert the cushion cover to the row of hog rings.





6. Remove all hog rings and cushion cover.

7. To assemble, reverse the disassembly procedure.