Accelerator Pedal - Adjustable

Accelerator Pedal - Adjustable









Removal and Installation

NOTE: The brake pedal and the accelerator pedal must be in the same position when installing a new cable or a new pedal. The pedals must be in the all the way forward position.

1. Disconnect the Accelerator Pedal Position (APP) sensor electrical connector.

2. Disconnect the accelerator pedal-to-brake pedal cable from the brake pedal.

3. Remove the 3 bolts and the accelerator pedal assembly.
- To install, tighten to 25 Nm (18 lb-ft).

4. To install, reverse the removal procedure.