Harmonic Balancer - Crankshaft Pulley

Crankshaft Pulley

Using the Crankshaft Vibration Damper Installer, install the crankshaft pulley.
Using a new crankshaft pulley bolt, install the bolt and washer and tighten the bolt in 4 stages.
- Stage 1: Tighten to 90 Nm (66 lb-ft).
- Stage 2: Loosen 360 degrees.
- Stage 3: Tighten to 50 Nm (37 lb-ft).
- Stage 4: Tighten an additional 90 degrees.