Audio Control Module (ACM)

Audio Control Module (ACM)






Removal and Installation

NOTE: It is not necessary to remove the Audio Control Module (ACM) to retrieve the part number. For additional information, refer to Reading and Clearing Diagnostic Trouble Codes

1. NOTE: Module configuration is required when a new ACM is being installed.

Upload the ACM configuration information to the scan tool. For additional information, refer to Programmable Module Installation (PMI)

2. Remove the instrument panel center finish panel. For additional information, refer to Service and Repair

3. Remove the 4 screws and the ACM.
- Disconnect the ACM electrical connectors.

4. To install, reverse the removal procedure.
- Download the configuration information to the ACM. For additional information, refer to PMI