Tailgate Latch Remote Control

Tailgate Latch Remote Control

Removal and Installation

1. Open and support the tailgate.

2. Remove the 7 bolts, the 4 pin-type retainers and the tailgate access panel.
- To install, tighten to 5 Nm (44 lb-in).

3. Open the 2 clips and release the 2 tailgate latch actuating rods from the tailgate remote control.

4. Release the 2 tailgate latch actuating rod locators from the tailgate.

5. Remove the 2 nuts and the tailgate remote control.
- To install, tighten to 9 Nm (80 lb-in).

6. To install, reverse the removal procedure.