Check MyKey(TM) System Status

MyKey(TM) Programming

Check MyKey(TM) System Status

1. NOTE: For direction on how to monitor MyKey(TM) system status, refer to the Owner's Literature.

The vehicle system check provides the status of the following MyKey(TM) parameters:

- MYKEY DISTANCE - This odometer only tracks mileage when a MyKey(TM) is used. If mileage does not accumulate, the intended MyKey(TM) is not being used or the IC is at fault. The only way to reset this odometer to zero is by disabling the MyKey(TM). If this odometer is lower than the last time it was checked, the MyKey(TM) system has been cleared. If desired, it may be necessary to program the MyKey(TM) restricted features into the key.

- # MYKEY(S) PROGRAMMED - Indicates how many MyKeys(TM) are programmed to the vehicle. It can also be used to determine if a MyKey(TM) has been disabled.

- # ADMIN KEYS PROGRAMMED - Indicates how many admin keys are programmed to the vehicle. It can also be used to determine if an additional spare key has been programmed to the vehicle.