External Sealing

Mechanical Components and Functions

External Sealing

The pump assembly has a lip-type seal for the torque converter impeller hub. The pump assembly uses a large O-ring to seal the transmission case. The pump bolts also seal the pump to the transmission case.

The manual control shaft has a lip seal for its bore in the transmission case.

The transmission fluid pan uses a reusable gasket.

The Four-Wheel Drive (4WD) applications use a lip-type seal that seals the transmission case to the output shaft flange.

The Rear Wheel Drive (RWD) applications use a lip-type seal that seals the transmission case to the output shaft flange.

The transmission case housing plug provides access to the park pawl shaft. The plug has a seal that is serviced as an assembly with the plug.

The bulkhead connector sleeve has a seal for the transmission case bore. The seal is serviced as an assembly with the bulkhead connector sleeve.

The plug for the fluid level indicator uses an O-ring seal.

External Sealing (Gaskets, O-rings and Seals)