Selector Lever Knob

Selector Lever Knob









Removal

1. Using a suitable tool, remove the instrument panel to floor console finish panel.





2. Remove the console upper trim panel, console tray and cup holder inserts.





3. Remove and discard the RH selector lever knob cover.

1. Start at the bottom front.

2. Move towards the top front and remove the cover.





4. Remove and discard the LH selector lever knob cover.

1. Start at the bottom front.

2. Move towards the top front and remove the cover.





5. Remove and discard the RH selector lever knob screw.





6. NOTE: Verify the LH and RH knob body towers are present and not damaged.

Remove and discard the LH selector lever knob screw.





7. Disconnect the Tow/Haul switch electrical connector and remove the selector lever knob.





Installation

1. Connect the Tow/Haul switch electrical connector and install the selector lever knob.





2. Install a new LH selector lever knob screw.





3. Install a new RH selector lever knob screw.





4. NOTE: Wood-trimmed vehicles have a rubber damper not found on other trim levels.

Install a new LH selector lever knob cover.





5. NOTE: Wood-trimmed vehicles have a rubber damper not found on other trim levels.

Install a new RH selector lever knob cover.





6. Install the console upper trim panel, console tray and cup holder inserts.





7. Install the instrument panel to floor console finish panel.