Band, Clutch, Solenoid, Application Charts

Band, Clutch, Solenoid, Application Chart (A)

NOTE: The Power Take-Off (PTO) may operate in any gear including PARK and NEUTRAL and does not require the Overdrive (O/D) One-Way Clutch (OWC). The Torque Converter Clutch (TCC) may engage in PARK and NEUTRAL with PTO engaged.






a PCM Calibration Controlled

b Cold Strategy

HP = High Pressure

LP = Low Pressure

HA = High Current

LA = Low Current

A = Applied

(I) = Inversely Proportional

Band, Clutch, Solenoid, Application Chart (B)

NOTE: The Power Take-Off (PTO) may operate in any gear including PARK and NEUTRAL and does not require the Overdrive (O/D) One-Way Clutch (OWC). The Torque Converter Clutch (TCC) may engage in PARK and NEUTRAL with PTO engaged.






a Cold Strategy

HP = High Pressure

LP = Low Pressure

HA = High Current

LA = Low Current

A = Applied

(D) = Directly Proportional

Band, Clutch, Solenoid, Application Chart (C)

NOTE: The Power Take-Off (PTO) may operate in any gear including PARK and NEUTRAL and does not require the Overdrive (O/D) One-Way Clutch (OWC). The Torque Converter Clutch (TCC) may engage in PARK and NEUTRAL with PTO engaged.






a PCM Calibration Controlled

b 207 kPa (30 psi) until speed reaches 5 km/h (3 mph)

c Clutch Applied Through Manual Valve Position

d Cold Strategy

HP = High Pressure

LP = Low Pressure

HA = High Current

LA = Low Current

A = Applied

(D) = Directly Proportional

(I) = Inversely Proportional

Band, Clutch, Solenoid, Application Chart (D)

NOTE: The Power Take-Off (PTO) may operate in any gear including PARK and NEUTRAL and does not require the Overdrive (O/D) One-Way Clutch (OWC). The Torque Converter Clutch (TCC) may engage in PARK and NEUTRAL with PTO engaged.






a PCM Calibration Controlled

b Cold Strategy

O/R = Overrunning

LP = Low Pressure

LA = Low Current

X = Holding

(D) = Directly Proportional

Band, Clutch, Solenoid, Application Chart (E)

NOTE: The Power Take-Off (PTO) may operate in any gear including PARK and NEUTRAL and does not require the Overdrive (O/D) One-Way Clutch (OWC). The Torque Converter Clutch (TCC) may engage in PARK and NEUTRAL with PTO engaged.






a PCM Calibration Controlled

b Cold Strategy

HP = High Pressure

LP = Low Pressure

HA = High Current

LA = Low Current

A = Applied

(I) = Inversely Proportional

Band, Clutch, Solenoid, Application Chart (F)

NOTE: The Power Take-Off (PTO) may operate in any gear including PARK and NEUTRAL and does not require the Overdrive (O/D) One-Way Clutch (OWC). The Torque Converter Clutch (TCC) may engage in PARK and NEUTRAL with PTO engaged.






a Cold Strategy

HP = High Pressure

LP = Low Pressure

HA = High Current

LA = Low Current

A = Applied

(D) = Directly Proportional

Band, Clutch, Solenoid, Application Chart (G)

NOTE: The Power Take-Off (PTO) may operate in any gear including PARK and NEUTRAL and does not require the Overdrive (O/D) One-Way Clutch (OWC). The Torque Converter Clutch (TCC) may engage in PARK and NEUTRAL with PTO engaged.






a PCM Calibration Controlled

b 207 kPa (30 psi) until speed reaches 5 km/h (3 mph)

c Clutch Applied Through Manual Valve Position

d Cold Strategy

HP = High Pressure

LP = Low Pressure

HA = High Current

LA = Low Current

A = Applied

(D) = Directly Proportional

(I) = Inversely Proportional

Band, Clutch, Solenoid, Application Chart (H)

NOTE: The Power Take-Off (PTO) may operate in any gear including PARK and NEUTRAL and does not require the Overdrive (O/D) One-Way Clutch (OWC). The Torque Converter Clutch (TCC) may engage in PARK and NEUTRAL with PTO engaged.






a PCM Calibration Controlled

b Cold Strategy

O/R = Overrunning

LP = Low Pressure

LA = Low Current

X = Holding

(D) = Directly Proportional

Band, Clutch, Solenoid, Application Chart (I)

NOTE: The Power Take-Off (PTO) may operate in any gear including PARK and NEUTRAL and does not require the Overdrive (O/D) One-Way Clutch (OWC). The Torque Converter Clutch (TCC) may engage in PARK and NEUTRAL with PTO engaged.






a PCM Calibration Controlled

HP = High Pressure

LA = Low Current

LP = Low Pressure

HA = High Current

A = Applied

(I) = Inversely Proportional

Band, Clutch, Solenoid, Application Chart (J)

NOTE: The Power Take-Off (PTO) may operate in any gear including PARK and NEUTRAL and does not require the Overdrive (O/D) One-Way Clutch (OWC). The Torque Converter Clutch (TCC) may engage in PARK and NEUTRAL with PTO engaged.






HP = High Pressure

LP = Low Pressure

HA = High Current

LA = Low Current

A = Applied

(I) = Inversely Proportional

Band, Clutch, Solenoid, Application Chart (K)

NOTE: The Power Take-Off (PTO) may operate in any gear including PARK and NEUTRAL and does not require the Overdrive (O/D) One-Way Clutch (OWC). The Torque Converter Clutch (TCC) may engage in PARK and NEUTRAL with PTO engaged.






HP = High Pressure

LP = Low Pressure

HA = High Current

LA = Low Current

A = Applied

(D) = Directly Proportional

(I) = Inversely Proportional

Band, Clutch, Solenoid, Application Chart (L)

NOTE: The Power Take-Off (PTO) may operate in any gear including PARK and NEUTRAL and does not require the Overdrive (O/D) One-Way Clutch (OWC). The Torque Converter Clutch (TCC) may engage in PARK and NEUTRAL with PTO engaged.






a PCM Calibration Controlled

O/R = Overrunning

X = Holding

(D) = Directly Proportional