Window Regulator - Front Door

Window Regulator - Front Door

Removal

1. Remove the window regulator motor. For additional information, refer to Window Regulator Motor - Front Door Window Regulator Motor - Front Door.

Installation

1. With the regulator assembly in the full UP position, position the window regulator motor on the new regulator assembly and install the motor bolts.
- Tighten to 13 Nm (115 lb-in).





2. Position the counterbalance spring on the regulator assembly as shown.





3. Install the locking tab of the counterbalance spring into the regulator assembly.
- Make sure the counterbalance spring is firmly seated into the regulator assembly.





4. Install the regulator and motor assembly. For additional information, refer to Window Regulator and Motor - Front Door Window Regulator and Motor - Front Door.