Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2010 >> Flex AWD V6-3.5L >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Accessories and Optional Equipment >> Parking Assist Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la
If it fails: lemon-manuals.org.ua

Or, hide this message: temporarily or permanently

Parking Assist Control Module: Service and Repair




Parking Aid Module (PAM)









Removal and Installation

1. NOTE: Module configuration is required when a new Parking Aid Module (PAM) is being installed.

Upload the PAM configuration information to the scan tool. For additional information, refer to Programmable Module Installation (PMI) in Information Bus. Programmable Module Installation (PMI)

2. Remove the RH C-pillar trim panel.

3. If replacing the parking aid speaker only, proceed as follows:
- Disconnect the electrical connector.

- Disengage the clips.

- Remove the parking aid speaker.

4. If replacing the PAM, proceed as follows:
- Disconnect the electrical connector.

- Remove the 2 pin-type screws.

- Remove the PAM.

5. To install, reverse the removal procedure.
- Download the configuration information to the PAM. For additional information, refer to PMI in Information Bus. Programmable Module Installation (PMI)

pro multis · About Operation CHARM