Seat Position Sensor: Service and Repair

Seat Position Sensor









1. Position the driver seat to the rearmost and maximum height position.

2. Depower the Supplemental Restraint System (SRS). For additional information, refer to Supplemental Restraint System (SRS) Depowering and Repowering Supplemental Restraint System (SRS) Depowering and Repowering in the General Procedures.

3. Disconnect the seat position sensor electrical connector.

4. Remove the lock tab from the seat position sensor.

5. Remove the seat position sensor from the bracket.

6. To install, reverse the removal procedure.

7. Repower the SRS. For additional information, refer to Supplemental Restraint System (SRS) Depowering and Repowering Supplemental Restraint System (SRS) Depowering and Repowering in the General Procedures.