Control Assembly: Service and Repair

Heating Ventilation Air Conditioning (HVAC) Module - Fusion, Milan

With Navigation System









Without Navigation System









Removal and Installation

Vehicles equipped with navigation system

1. Remove the Front Display Interface Module (FDIM). For additional information, refer to Accessories and Optional Equipment.

2. Remove the 2 HVAC module screws.

3. Disconnect the 2 HVAC module electrical connectors and remove the HVAC module.

Vehicles without navigation system

4. Remove the center instrument panel finish panel. For additional information, refer to Instrument Cluster / Carrier &/or Interior Moulding / Trim.

5. Remove the 4 HVAC module screws and remove the HVAC module.

All vehicles

6. To install, reverse the removal procedure.