Spark Plugs

Spark Plugs

Removal and Installation

1. Remove the 4 ignition coil-on-plugs. For additional information, refer to Ignition Coil-On-Plug Ignition Coil-On-Plug.

2. NOTICE: Only use hand tools when removing or installing the spark plugs, or damage can occur to the cylinder head or spark plug.

NOTE: Use compressed air to remove any foreign material in the spark plug well before removing the spark plugs.

Remove the 4 spark plugs.

- To install, tighten to 12 Nm (106 lb-in).

3. Inspect the 4 spark plugs. For additional information, refer to Engine.

4. To install, reverse the removal procedure.
- Adjust the spark plug gap as necessary.