Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2010 >> Fusion FWD L4-2.5L >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Restraints and Safety Systems >> Seat Occupant Classification Module - Air Bag >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Seat Occupant Classification Module - Air Bag: Service and Repair




Occupant Classification System Module (OCSM)

NOTE: Power seat shown, manual seat similar.











Removal and Installation

NOTE: The air bag warning indicator illuminates when the correct Restraints Control Module (RCM) fuse is removed and the ignition switch is ON.

NOTE: The Supplemental Restraint System (SRS) must be fully operational and free of faults before releasing the vehicle to the customer.

1. Remove the passenger seat. For additional information, refer to Seats.

2. Disconnect the electrical connector.

3. NOTICE: Make sure to remove all metal chips from the Occupant Classification System Module (OCSM) and the surrounding areas after drilling out the rivets. Failure to follow this instruction may result in component damage and/or system failure.

Drill out the 2 rivets and remove the Occupant Classification System Module (OCSM).

4. To install, reverse the removal procedure.

5. If installing a new OCSM, carry out the system reset procedure. For additional information, refer to Occupant Classification Sensor (OCS) System Reset Programming and Relearning in the General Procedures portion.

pro multis · About Operation CHARM