Transaxle Support Insulator

Transaxle Support Insulator













Removal and Installation

1. Remove the Air Cleaner (ACL) assembly. For additional information, refer to Fuel Delivery and Air Induction.

2. Install the Engine Support Bar and support the engine and transaxle.





3. Disconnect the hood ajar electrical connector.





4. Remove the bolt and the nut and position aside the Battery Junction Box (BJB).
- To install, tighten to 10 Nm (89 lb-in).





5. Remove the 5 nuts and remove the transaxle support insulator and the bracket.
- To install, tighten to 90 Nm (66 lb-ft).





6. To install, reverse the removal procedure.