Parking Brake Control

Parking Brake Control

Removal and Installation

1. Remove the floor console. For additional information, refer to Instrument Cluster / Carrier &/or Interior Moulding / Trim.

2. Release the parking brake.

3. Disconnect the electrical connector.

4. Disconnect the parking brake cable from the parking brake control.
- Remove the adjustment nut and washer.

- Discard the adjustment nut.

5. Remove the 2 parking brake control bolts and the parking brake control.
- To install, tighten the bolts to 20 Nm (177 lb-in).

6. To install, reverse the removal procedure.
- Install a new adjustment nut.

- Adjust the parking brake. For additional information, refer to Parking Brake Cable Adjustment Adjustments.