Audio Control Module (ACM)

Audio Control Module (ACM)

NOTE: 6-CD Audio Control Module (ACM) shown, others similar.











Removal and Installation

NOTE: It is not necessary to remove the Audio Control Module (ACM) to retrieve the part number. For additional information, refer to Audio Control Module (ACM) Self-Diagnostic Mode Audio Control Module (ACM) Self-Diagnostic Mode.

1. NOTE: Module configuration is required when a new ACM is being installed.

NOTE: Module configuration is not required for the Base AM/FM ACM.

Upload the ACM configuration information to the scan tool. For additional information, refer to Module Configuration Special Tool(s) Used With Diagnostics.

2. Remove the instrument cluster finish panel. For additional information, refer to Instrument Panel and Console Instrument Cluster Finish Panel.

3. Remove the 4 screws and the ACM.
- Disconnect the electrical connectors and antenna cable(s).

4. To install, reverse the removal procedure.
- Download the configuration information to the ACM. For additional information, refer to Module Configuration Special Tool(s) Used With Diagnostics.