Compass Zone Adjustment

Compass Zone Adjustment

1. Determine which magnetic zone you are in for your geographic location.





2. Place the key in the ON position.

3. Press and release the SELECT/RESET button until HOLD RESET FOR SETUP MENU is displayed.

4. Press and hold the SELECT/RESET button until HOLD RESET FOR SYSTEM CHECK is displayed then immediately release the SELECT/RESET button.

5. Press and release the SELECT/RESET button until COMPASS ZONE XX is displayed.

6. Press and hold the SELECT/RESET button for approximately 2 seconds to enter the compass zone setting mode.

7. NOTE: The zone selection increases with each subsequent button press with a range of zones from 1 to 15 scrolling back to the beginning.

Press and release the SELECT/RESET button until the desired zone setting is displayed.

8. To exit the compass zone setting mode, release the SELECT/RESET button and allow the setup timer to expire and return to normal operation.