Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2011 >> E 150 V8-5.4L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Camshaft Position Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Camshaft Position Sensor: Service and Repair




Camshaft Position (CMP) Sensor





NOTE: 4.6L shown, 5.4L and 6.8L similar.











Removal and Installation

1. Remove the Air Cleaner (ACL) and ACL outlet pipe. For additional information, refer to Intake Air Distribution and Filtering Intake Air System Components - Exploded View.

2. Disconnect the Camshaft Position (CMP) sensor electrical connector.

3. Remove the bolt and the CMP sensor. Inspect the O-ring seal for damage and install new if necessary.
- Lubricate the O-ring seal and with clean engine oil prior to installation.

- To install, tighten to 10 Nm (89 lb-in).

4. To install, reverse the removal procedure.

pro multis · About Operation CHARM