Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2011 >> Edge FWD V6-3.7L >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Wheel Speed Sensor >> Service and Repair >> Wheel Speed Sensor - Front
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Wheel Speed Sensor - Front




Wheel Speed Sensor - Front









Removal and Installation

1. Remove the wheel and tire.

2. Remove the retainers and position the fender splash shield aside.

3. Disconnect the wheel speed sensor electrical connector.

4. Disconnect the 6 pushpin fasteners.

5. Remove the front wheel speed sensor bolt and the wheel speed sensor.
- To install, tighten to 7 Nm (62 lb-in).


6. NOTICE: The wheel speed sensor harness must be routed as shown or damage to the harness during vehicle jounce and rebound can occur.

To install, reverse the removal procedure.





pro multis · About Operation CHARM