Blower Motor Switch: Service and Repair

Blower Motor Speed Control

Removal and Installation

1. Remove the 2 glove compartment retainer pins.





2. Remove the glove compartment.
1. Detach the glove compartment damper from the glove compartment.

2. Release the stops by pressing them toward the center of the glove compartment while lowering the glove compartment, and remove the glove compartment.






3. Remove the blower motor speed control.
1. Disconnect the blower motor speed control electrical connector.

2. Remove the 2 blower motor speed control screws.

3. Remove the blower motor speed control.






4. To install, reverse the removal procedure.