Fog/Driving Lamp: Service and Repair

Fog Lamp









Removal and Installation

NOTE: Make sure the headlamp switch and the ignition switch are in the OFF position.

1. With the vehicle in NEUTRAL, position it on a hoist.

2. NOTE: The wheel and tire shown removed for clarity.
Remove the 5 screw and washers and position the fender splash shield aside.






3. Disconnect the fog lamp electrical connector.

4. Release the tabs and remove the fog lamp cover and outer bezel as an assembly.

5. Release the 2 locking tabs and remove the fog lamp.

6. To install, reverse the removal procedure.