Battery Tray

Battery Tray

Removal and Installation

1. Remove the battery. For additional information, refer to Battery Battery.

2. Remove the battery cable harness locator from the battery tray.

3. Remove the battery tray bolt.
- To install, tighten to 9 Nm (80 lb-in).


4. Remove the battery tray-to-bracket bolt.
- To install, tighten to 9 Nm (80 lb-in).


5. Remove the battery tray nut.
- To install, tighten to 9 Nm (80 lb-in).


6. Remove the battery tray.

7. To install, reverse the removal procedure.