Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2011 >> Edge FWD V6-3.7L >> Repair and Diagnosis >> Wiper and Washer Systems >> Windshield Washer Reservoir >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Windshield Washer Reservoir: Service and Repair




Washer Reservoir





Removal and Installation

1. Remove the RH front fender splash shield.

2. Disconnect the washer pump electrical connector.

3. Drain the washer reservoir.

4. Disconnect the washer pump hoses.

5. Remove the bolt from the washer reservoir filler neck.
- To install, tighten to 9 Nm (80 lb-in).


6. Remove the washer reservoir nuts and the washer reservoir.
- To install, tighten to 9 Nm (80 lb-in).






7. NOTICE: Do not operate the washer pump prior to filling the washer reservoir. Failure to follow these instructions may result in premature pump failure.

To install, reverse the removal procedure.
- Fill the washer reservoir with windshield washer fluid.

pro multis · About Operation CHARM