Removal and Replacement

Engine Mount













Removal and Installation

1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Jacking and Lifting Service and Repair.

2. Install the Engine Support Bar.





3. Remove the engine mount bracket bolt.
- To install, tighten to 115 Nm (85 lb-ft).

4. Use the Engine Support Bar to raise the engine 25 mm (0.98 in).





5. Remove the 3 nuts and the engine mount bracket.
- To install, tighten to 115 Nm (85 lb-ft).

6. Remove the 3 bolts and the engine mount.
- To install, tighten to 48 Nm (35 lb-ft).

7. To install, reverse the removal procedure.