Oil Separator: Service and Repair

Crankcase Vent Oil Separator









Removal and Installation

1. Remove the intake manifold. For additional information, refer to Engine - 2.5L Service and Repair.

2. Release the coolant bypass hose from the clip.

3. NOTE: Remove and discard the crankcase vent oil separator gasket.

Remove the 8 bolts, the crankcase vent oil separator.

- To install, tighten to 10 Nm (89 lb-in).

4. To install, reverse the removal procedure.
- Clean and inspect the sealing surfaces.

- Install a new crankcase vent oil separator gasket.