Washer Pump

Washer Pump





Removal and Installation

1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Jacking and Lifting Service and Repair.

2. Remove the RH front fender splash shield. For additional information, refer to Front End Body Panels Fender.

3. Disconnect the washer pump electrical connector.

4. WARNING: Carefully read cautionary information on product label. For EMERGENCY MEDICAL INFORMATION seek medical advice. In the USA or Canada on Ford/Motorcraft products call: 1-800-959-3673. For additional information, consult the product Material Safety Data Sheet (MSDS) if available. Failure to follow these instructions may result in serious personal injury.

NOTE: To prevent spilling windshield washer fluid, drain the windshield washer reservoir before washer pump removal.

Disconnect the washer pump hoses. For additional information, refer to C-Lock Coupler Service and Repair.

5. NOTICE: When installing a new washer pump, be careful not to damage the rubber grommet.

Remove the washer pump.

6. NOTICE: Do not operate the washer pump prior to filling the windshield washer reservoir. Failure to follow these instructions may result in premature pump failure.

To install, reverse the removal procedure.

- Fill the windshield washer reservoir with windshield washer fluid.