Do you have access to Mitchell1 Prodemand, or eautorepair.net DIY? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
Engine Block Heater: Service and Repair
Block Heater
2.5L
3.0L
Removal and Installation
1. Drain the cooling system. For additional information, refer to Cooling System Draining, Filling and Bleeding Cooling System Draining, Filling and Bleeding.
2. NOTICE: Make sure that the block heater wiring is routed and secured away from rotating or hot components, or damage to the wiring can occur.
Disconnect the block heater electrical connector.
3. Remove the block heater.
- To install, tighten to 40 Nm (30 lb-ft) (2.5L).
- To install, tighten to 25 Nm (18 lb-ft) (3.0L).
4. To install, reverse the removal procedure.
5. Fill and bleed the cooling system. For additional information, refer to Cooling System Draining, Filling and Bleeding Cooling System Draining, Filling and Bleeding.