Coolant Pump

Coolant Pump - 3.0L (4V)









Removal

1. Drain the cooling system. For additional information, refer to Cooling System Draining, Filling and Bleeding Cooling System Draining, Filling and Bleeding.

2. Remove the Air Cleaner (ACL) outlet pipe. For additional information, refer to Intake Air Distribution and Filtering - 3.0L (4V) Air Cleaner Outlet Pipe.

3. Disconnect the lower radiator hose from the thermostat housing.

4. Remove the coolant pump belt. For additional information, refer to Accessory Drive - 3.0L (4V) Coolant Pump Belt.

5. Remove the 3 bolts and the coolant pump.
- Remove and discard the gasket.

Installation

1. Using a new gasket, install the coolant pump and the 3 bolts.
- Tighten to 10 Nm (89 lb-in).

2. Install the coolant pump belt. For additional information, refer to Accessory Drive - 3.0L (4V) Coolant Pump Belt.

3. Connect the lower radiator hose to the thermostat housing.

4. Install the ACL outlet pipe. For additional information, refer to Intake Air Distribution and Filtering - 3.0L (4V) Air Cleaner Outlet Pipe.

5. Fill and bleed the cooling system. For additional information, refer to Cooling System Draining, Filling and Bleeding Cooling System Draining, Filling and Bleeding.