Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously
Braking Sensor/Switch: Service and Repair
Brake Pedal Angle Sensor
Removal and Installation
1. Remove the brake pedal bracket. For additional information, refer to Brake Pedal and Bracket - Hybrid Service and Repair.
2. Remove and discard the 2 brake pedal angle sensor screws.
3. Remove the brake pedal angle sensor.
4. To install, reverse the removal procedure.
- Install new brake pedal angle sensor screws.
5. Carry out the Multi-Calibration Routine. Follow the scan tool directions.