Cowl Moulding / Trim: Service and Repair

Cowl Panel Grille









Removal and Installation

Both sides

1. Remove the windshield wipers. For additional information, refer to Wipers and Washers Wiper Pivot Arm - Front.

LH side

2. Remove the pin-type retainer and lift the LH cowl trim panel to release the 3 underside pushpin retainers that are attached to the cowl trim panel.
- Disconnect the windshield washer tube.

RH side

3. Remove the pin-type retainer and lift the RH cowl trim panel to release the 2 underside pushpin retainers that are attached to the cowl trim panel.
- Disconnect the windshield washer tube.





Both sides

4. To install, reverse the removal procedure.

5. If necessary, adjust the windshield wiper arms. For additional information, refer to Wipers and Washers Wiper Blade and Pivot Arm Adjustment - Windshield.