Front Door: Service and Repair

Door

NOTE: Right front door shown, all other doors similar.











Removal and Installation

1. Remove the door speaker. For additional information, refer to Information and Entertainment Systems Speaker - Door.

2. Partially remove and position aside the door weather shield.

3. Disconnect the electrical connectors.
- Disconnect the window switch electrical connector.

- Disconnect the door lock switch electrical connector.

- Disconnect the door speaker electrical connector.

- If equipped, disconnect the outside rearview mirror switch electrical connector.

4. Remove the wiring harness from the door.

5. If equipped, remove the 2 door check arm-to-door bolts.

6. NOTE: An assistant is necessary for the removal of the door.

Remove the 4 door hinge-to-door bolts.

- To install, tighten to 30 Nm (22 lb-ft).

7. To install, reverse the removal procedure.