Fuel Door: Service and Repair

Fuel Filler Door Cup Bezel









Removal

NOTICE: The fuel filler door cup bezel is a one-time use only part. Removal of this part will result in damage to the component.

NOTICE: Do not attempt to pry on the bottom of the fuel filler door cup bezel. Failure to follow this direction may result in damage to the vehicle.

1. Using a non-marring body tool, pry outward on the upper RH side of the fuel filler door cup bezel until the clip breaks.





2. Using a non-marring body tool, pry the upper LH side of the fuel filler door cup bezel until the clip breaks.





3. Pull upward and outward to remove the fuel filler door cup bezel.

Installation

1. NOTICE: Make sure to align the fuel filler door cup bezel to the alignment slots and the filler neck. Failure to follow this direction may result in damage to the component and/or vehicle.

Align the fuel filler door cup bezel to the vehicle.





2. Push inward and downward until the clips snap into place.