Console - Front, Floor

Console - Front, Floor, Expedition









Removal

1. Apply the parking brake.

2. Position the selector lever in the NEUTRAL position.

3. Position the front seats forward.

4. Remove the 2 front floor console rear bolts.





5. Position the front seats rearward.

6. Remove the 2 front floor console front bolts.
- Remove the 2 front floor console bolt covers.

- Remove the 2 front floor console bolts.

7. Remove the selector lever trim ring.





8. Remove the front floor console utility tray mat.

9. Remove the front floor console utility tray screw.





10. Remove the floor console upper finish panel.

11. Position the selector lever indicator bezel aside.
- Release the 4 retainers and position aside.





12. Disconnect the selector lever cable from the selector lever and the floor console.





13. Remove the front floor console front screws.





14. Disconnect the front floor console electrical connectors.

1. Loosen the bulkhead electrical connector bolts.

2. Disconnect the bulkhead electrical connectors.

3. Disconnect the electrical connector.





15. Remove the front floor console.

Installation

1. Install the front floor console.

2. Connect the front floor console electrical connectors.
- Tighten the bulkhead electrical connector bolts to 3 Nm (27 lb-in).

3. Install the front floor console front screws.
- Tighten to 7 Nm (62 lb-in).





4. Install the selector lever cable.

5. Install the selector lever indicator bezel.

6. Install the floor console upper finish panel.
- Make sure to align the trim panel retaining clips to the retaining clip holes in the floor console.

7. Install the front floor console utility tray screw.

8. Install the front floor console utility tray mat.

9. Install the selector lever trim ring.

10. Install the 2 front floor console front bolts.
- Tighten to 7 Nm (62 lb-in).

11. Install the 2 front floor console front bolt covers.

12. Position the front seats forward.

13. Install the 2 front floor console rear bolts.
- Tighten to 7 Nm (62 lb-in).





14. Position the front seats rearward.

15. Position the selector lever in the PARK position.

16. Release the parking brake.