Seat Cushion Thermo-Electric Device

Seat Cushion Thermo-Electric Device

Removal and Installation

NOTE: For component identification and locations, refer to Seat - Exploded View, Front Seat - Exploded View, Front.

1. Remove the seat. For additional information, refer to Seat - Front Seat - Front.

2. NOTE: Use care when removing the Thermo-Electric Device (TED). The U-nuts can slip into the cushion frame.

Remove the seat cushion TED.

- Disconnect the electrical connector and detach the wire harness.

- Remove the 2 screws and TED.

- For correct installation, note wire harness routing.





3. To install, reverse the removal procedure.