Seat Track - Manual

Seat Track - Manual

Removal and Installation

NOTE: For component identification and locations, refer to Seat - Exploded View, Front Seat - Exploded View, Front.

1. Remove the seat. For additional information, refer to Seat - Front Seat - Front.

2. Remove the inboard and outboard seat track rails.
- Remove the 6 seat track rail-to-seat track nuts from the inboard and outboard seat track rails.
- To install, tighten to 30 Nm (22 lb-ft).

- Remove the inboard and outboard seat track rails.

- Release and separate the seat track adjust handle from the seat track rails.
- Disconnect the spring.

- Slightly bend the tab and detach the seat adjust handle from the inboard seat track rail.

- Note the spring position for correct installation.





3. To install, reverse the removal procedure.