Auxiliary Blower Motor Resistor

Auxiliary Blower Motor Resistor









Removal and Installation

NOTE: Expedition or Navigator shown, Expedition EL or Navigator L similar.

All vehicles

1. Remove the RH quarter trim panel access panel.





Expedition or Navigator only

2. Remove the blower motor resistor.
- Disconnect the blower motor resistor electrical connector.

- Remove the 2 blower motor resistor screws and the blower motor resistor.

Expedition EL or Navigator L only

3. Remove the blower motor resistor.
- Disconnect the blower motor resistor electrical connector.

- Remove the blower motor resistor screw.

- Detach the 2 blower motor resistor clips and remove the blower motor resistor.

All vehicles

4. To install, reverse the removal procedure.