Instrument Cluster Finish Panel

Instrument Cluster Finish Panel - Expedition









Column shift vehicles only

1. Place the selector lever to the 1 position.

All vehicles

2. Remove the steering column opening trim panel.
- Remove the 3 steering column opening trim panel screws.

- Release the steering column opening trim panel from the instrument panel.





3. Tilt the steering wheel to the full down position.

4. Remove the instrument cluster finish panel bridge.
- Pull upward and then left on the LH side of the finish panel bridge to release the retainer and remove the finish panel bridge.

5. Remove the 2 instrument cluster finish panel screws.

6. Remove the instrument cluster finish panel.
- Pull on the finish panel to release it from the retainers.

- Disconnect the electrical connectors.

7. To install, reverse the removal procedure.
- Make sure to align the trim panel retaining clips to the retaining clip holes in the instrument panel.