Windshield Washer Pump: Service and Repair

Washer Pump

Removal and Installation

WARNING: Carefully read cautionary information on product label. For EMERGENCY MEDICAL INFORMATION seek medical advice. In the USA or Canada on Ford/Motorcraft products call: 1-800-959-3673. For additional information, consult the product Material Safety Data Sheet (MSDS) if available. Failure to follow these instructions may result in serious personal injury.

NOTICE: When servicing the windshield washer pump, be careful not to damage the windshield washer pump seal.

NOTICE: Do not operate the windshield washer pump before filling the windshield washer reservoir. Failure to do so may result in premature pump failure.

1. Remove the RH headlamp assembly. For additional information, refer to Exterior Lighting Service and Repair.

2. Position aside the shield as necessary to gain access to the washer pump.

3. Disconnect the windshield washer reservoir hoses.

4. Disconnect the windshield washer pump electrical connector.

5. Remove the windshield washer pump.

6. To install, reverse the removal procedure.